Home›H&S Tuners

Hsperformance Updates Hs Updater Exe Download
H&s Performance Updates
Hsperformance Updates Hs Updater Exe Free
H&s Updater
Hsperformance Updates Hs Updater Exe Windows 10

Im not an expert but i dont think you can use a tuner from a 6.4 on a 6.7 even if it is unlocked. Theyre different motors, different turbo setups, which i imagine requires all different tuning. Im not sure an update will allow you to use it on a newer truck. You cant use a minimaxx made for the 11-14 models on a 15-16 and thats just a different turbo and fuel setup. Your trying to do different. Technical data is gathered for the products supported by this tool and is used to identify products, provide relevant solutions and automatically update this tool, to improve our products, solutions, services, and your experience as our customer. Note: This tool applies to Microsoft Windows PC's only. This tool will detect HP PCs and HP printers. H s performance update instructions. Uploads.strikinglycdn.com DA: 25 PA: 50 MOZ Rank: 76. H s performance update instructions Continue Diesel Performance Tuners - Net H'S Performance diesel power produces high-performance racing exhaust, including dpf removes - XRT and Black Maxx racing tuners for 6.7L Cummins Diesel, 6.4L Powerstroke Diesel, 6.6L LMM Duramax Diesel.ASRock Fatal1ty 970. Yes, I found a updater but now when I update my SD card, put it in the mini maxx and hit 'update firmware' it still says 6.4.52, I've tried 2 different SD cards, I've tried wiping them clean and re updating, can't get it to work. Hd-updaterservice.exe has 3 known versions, the most recent one is 0.8.11.3116. It is started as a Windows Service called 'BlueStacks Updater Service' with the name 'BstHdUpdaterSvc'. In addition, it is run under the context of the SYSTEM account with extensive privileges (the administrator accounts have the same privileges).

in H&S Tuners

Mini Maxx tuner on 08 F250 6.4 dpf delete. I bought the tuner new and have never had a problem with it but I haven't updated it in several years. I now would like to update the tune so I can adjust the transmission shifting and TC lockup. I have run the update.exe file on a new SD card (I don't want to mess up my current setup). My question is: can I just change the trans settings and still maintain the other settings I have installed?

Comments

No need to update. H&S hasn't put out any new tune modifications in probably 3 or 3 1/2 years for the 6.4. Did you purchase another 2GB SD Card? If it's not a 2GB it won't work in the tuner. Has to be a 2GB.
To adjust your trans tuning all you need to do is go to download and proceed to answer the questions until you get to trans tuning. Set it to what you want and load the truck.
It will not 'remember' what you have now. You will have to answer all questions again.
Oh, and you can see some of the current settings if you go to the 'show settings' screen.
Thanks, I'll check the settings again but I think I haven't updated it since when you had to select the trans setting when you loaded the SD card from your computer.
Okay well updating might be beneficial if yours is that old. Do you have a good handle on how to do that? I will tell you that you will need to only select your year and make truck to update since the 2GB card is too small to update all trucks. Then insert the card in the tuner and select to update firmware before loading the truck.
It's been a long time. That's why I didn't want to overwrite the SD card I'm using now. I'll have to get a 2GB card. I bought a 16 gig - appreciate the heads up on that. I'd have been fighting that right off the bat.
After you update the 2GB with just your truck then put it in the tuner and do a firmware update, you can then use either a 4GB or 8GB and go back and load all trucks. That way you will have the latest on all trucks should you ever want to sell the tuner you can sell it to someone with a different truck should you need to.
Makes sense. I'm taking the truck on a short trip next week so I'll probably not do anything until I get back. Pulling a loaded 30' trailer and don't want any surprises. I may need to ask more questions when I get back and ready to do the update.
Thanks for all the help.
If you have any questions feel free to ask away!!
No need to update. H&S hasn't put out any new tune modifications in probably 3 or 3 1/2 years for the 6.4. Did you purchase another 2GB SD Card? If it's not a 2GB it won't work in the tuner. Has to be a 2GB.
To adjust your trans tuning all you need to do is go to download and proceed to answer the questions until you get to trans tuning. Set it to what you want and load the truck.
It will not 'remember' what you have now. You will have to answer all questions again.
I'm curious, why does it have to be a 2GB card? I have a 4GB card I got from Rudys with all the current updates on it and I get the missing sd card message when I try to update firmware. My mini Maxx came in my truck and was missing the sd card FYI
The tuners required a 2GB card to work until the latest firmware. Since a 4GB does not work in yours then you probably don't have the latest firmware. If someone does not have the latest and goes to try and use a 4GB or an 8GB then it will get the message.
Try getting a 2GB, use the updater on this site and ONLY select your truck to update. The 2Gb is too small for all trucks to fit. Then insert it and update the firmware. Once that is done a 4GB will work.
Oh and if the 2GB still gives you the message, you can try to blow a shot of canned air in the slot where the SD card slides into the tuner. If it's really dirty, you can get some of this: http://wd40specialist.com/products/contact-cleaner/ and spray it in the slot and on the SD card contacts. Try it again.
The 2gb card worked! I now have the latest update installed and will tackle my egr delete and wastegate install next weekend! Thanks for the help, I was getting pretty frustrated!
I got an 08 f250 I went to put my mini max on. It came back said incompatible version. Current 1023 upgrade version 1019. Do I need to buy another SD card preloaded or can I just upgrade. Thanks in advance for all help
edited July 2016
Just download the updater here: https://dieseltunerpros.com/discussion/3/download-the-h-s-updater-here#latest. If you have a 2GB SD card, only select your make and year truck to update. The 2GB is too small to update all trucks. Once the updater is done, put the SD card back in the tuner and go to menu and scroll down to firmware update. Do that then load the truck.
If you have any problems post back and I can help further.
Thanks Smoking for the help. I think I got other problems with it . I had it on a 08 F250 then put on a 08 dodge took off the dodge to put back on the Ford but it wont let me switch vehicles. comes back saying incompatible version. I then went menu firmware update but still wont go to the Ford.Thanks again
When you took it off the Dodge did you return the Dodge back to OEM stock? Look at the show settings screen and next to tune status what does it say? Installed or Not Installed?
I looked and said not installed. I looked later seem a second page on second page show transmission locked. I thought it got all taken out returning to stock. Is there anyway to clear it. Thanks
It probably still shows the Dodge as the truck it's on. Do this:
Unplug the tuner from the OBD port and plug it in slooooowly until it beeps. Stop there. The objective is to get the two longest pins to make contact. Only those pins. These are the ones for power. Then go to menu > change vehicle and select your year and make truck. Save that. Now plug the tuner the rest of the way in and download the truck. Let me know if that worked.
It didn't work. Could I just make a couple jumpers.
after using updater wha

Hsperformance Updates Hs Updater Exe